Publications(論文著作)

國際期刊 (*: Corresponding author)

  1. Chih-Kuang Wang, Jiin-Huey Chern Lin*, Chien-Ping Ju, Hong Choon Ong and Robert P. H. Chang, “Structural characterization of pulsed laser-deposited hydroxyapatite on titanium substrate”, Biomaterials, 18:1331-1338, 1997.
  2. Chih-Kuang Wang, Jiin-Huey Chern Lin, Chien-Ping Ju*, Effect of doped bioactive glass on structure and properties of sintered hydroxyapatite, Materials Chemistry and Physics, 53:138-149, 1998.
  3. Chien-Ping Ju*, Chih-Kuang Wang, Hung-Yih Cheng, Jiin-Huey Chern Lin, Process and Wear Behavior of Monolithic SiC and Short Carbon Fiber-SiC Matrix Composite, Journal of Materials Science, 35: 4477-4484, 2000.
  4. Yi-Pang Lee, Chih-Kuang Wang, Tsui-Hsien Huang, Chun-Cheng Chen, Chia-Tze Kao, Shinn-Jyh Ding*, In Vitro characterization of post heat-treated plasma-sprayed hydroxyapatite coatings, Surface and Coatings Technology, 197: 367–374, 2005.
  5. C. Fu, M.L. Ho, S.C. Wu, H.S. Hsieh, Chih-Kuang Wang*, Porous bioceramic bead prepared by calcium phosphate with sodium alginate gel and PE powder, Materials Science and Engineering C, 28: 1149-1158, 2008.
  6. C. Fu, H. Nie, M.L. Ho, Chih-Kuang Wang, C.H. Wang*, Optimized bone regeneration based on sustained release from three-dimensional fibrous PLGA/HAp composite scaffolds loaded with BMP-2, Biotechnology & Bioengineering, 99: 996-1006, 2008.
  7. Mei-Ling Ho, Yin-Chih Fu, Gwo-Jaw Wang, Hui Ting Chen, Je-Ken Chang, Tsung Hsien Tsai, Chih-Kuang Wang*, Controlled release carrier of BSA made by W/O/W emulsion method containing PLGA and hydroxyapatite, Journal of Controlled Release, 128: 142-148, 2008.
  8. C. Chen, C.C. Hung, Y.C. Huang, Chih-Kuang Wang and J.C. Wang*, Fracture load of provisional fixed partial dentures with long-span fiber-reinforced acrylic resin and thermocycling, Journal of Dental Sciences, 4: 25-31, 2009.
  9. Bing-HungChen, Kang-I Chen, Mei-Ling Ho, Hong-Nian Chen, Wen-Cheng Chen, Chih-Kuang Wang*, Synthesis of calcium phosphates and porous hydroxyapatite beads prepared by emulsion method, Materials Chemistry and Physics, 113: 365-371, 2009.
  10. Chih-Kuang Wang, SZU-HSIEN CHEN, WAN-YUN LI, CHERN-HSIUNG LAI, and WEN-CHENG CHEN*, Bioactive glass shell growth of a Si–Na–Ca–P layer on gold nanoparticles functionalized with mercaptopropyltrimethyloxysilane- silicate-tetraethylothosilicate”, Surface Review and Letters 16: 37–42, 2009.
  11. Nie, M.L. Ho, Chih-Kuang Wang, C.H. Wang, Y.C. Fu*, BMP-2 plasmid loaded PLGA/HAp composite scaffolds for treatment of bone defects in nude mice, Biomaterials 30: 892–901, 2009.
  12. K. Chang, C.J. Li, H.J. Liao, Chih-Kuang Wang, G.J. Wang, M.L. Ho*, Anti-inflammatory drugs suppress proliferation and induce apoptosis through altering expressions of cell cycle regulators pro-apoptotic factors in cultured human osteoblasts, Toxicology 258: 148–156, 2009.
  13. H. Tseng, Y.L. Chen, C.M. Lu, Chih-Kuang Wang, Y.T. Tsai, R.W. Lin, C.F. Chen, Y.F. Chang, G.J. Wang, M.L. Ho, and C.C. Tzeng*, Synthesis and Anti-osteoporotic Evaluation of Certain 3-Amino-2-hydroxypropoxyisoflavone Derivatives, European Journal of Medicinal Chemistry 44:3621-3626, 2009.
  14. Chih-Kuang Wang, Mei-Ling Ho, Gwo-Jaw Wang, Je-Ken Chang, Chung-Hwan Chen, Yin-Chih Fu*, Hwai-Hui Fu, Controlled-release of rhBMP-2 carriers in the regeneration of osteonecrotic bone, Biomaterials 30: 4178–4186, 2009.
  15. Chih-Kuang Wang, Chau-Zen Wang, Jen-Chyan Wang, Chun-Cheng Hung, Wan-Yun Li, Wen-Cheng Chen*, Preparation and characterization of calcium phosphate deposited on gold nanoparticles, Journal of Non-Crystalline Solids, 356:927-932, 2010.
  16. Shun-Cheng Wu, Chung-Hwan Chen, Je-Ken Chang, Yin-Chih Fu, Chih-Kuang Wang, Rajalakshmanan Eswaramoorthy, Yi-Shan Lin, Yao-Hsien Wang, Sung-Yen Lin, Gwo-Jaw Wang, Mei-Ling Ho*, Hyaluronan initiates chondrogenesis mainly via CD44 in human adipose derived stem cells, Journal of Applied Physiology, 114:1610-1618, 2013)
  17. Chung-Hwan Chen, Yi-Shan Lin, Yin-Chih Fu, Chih-Kuang Wang, Shun-Cheng Wu, Gwo-Jaw Wang, Rajalakshmanan Eswaramoorthy,Yan-Hsiung Wang, Chau-Zen Wang, Yao-Hsien Wang, Sung-Yen Lin, Je-Ken Chang*, Mei-Ling Ho*, Electromagnetic fields enhance chondrogenesis of human adipose-derived stem cells in a chondrogenic microenvironment in vitro. Journal of Applied Physiology, 114:647-655, 2013.
  18. Pei-Chien Tsai, Chi-Ying Hsieh, Chien-Chih Chiu, Chih-Kuang Wang, Long-Sen Chang, Shinne-Ren Lin*, Cardiotoxin III suppresses MDA-MB-231 cell metastasis through the inhibition of EGF/EGFR-mediated signaling pathway, Toxicon, 60:734-43. 2012.
  19. Yin-Chih Fu, Mei-Ling Ho, Gwo-Jaw Wang, Chih-Kuang Wang, Controlled-release biodegradable hap in large bone defect nonunion study (in vitro and in vivo), Bone, Volume 48, Supplement 2, Page S172, May 7, 2011.
  20. Po-Len Liu, Jong-Rung Tsai, Chien-Chih Chiu, Jhi-Jhu Hwang, Shah-Hwa Chou, Chih-Kuang Wang, Shu-Jing Wu, Yuh-Lien Chen, Wen-Chi Chen, Yung-Hsiang Chen,* Inn-Wen Chong*, Decreased expression of thrombomodulin is correlated with tumor cell invasiveness and poor prognosis in nonsmall cell lung cancer, Molecular Carcinogenesis, 49:874-881, 2010.
  21. Chau-Zen Wang, Shih-Mao Chen, Chung-Hwan Chen, Chih-Kuang Wang, Gwo-Jaw Wang,  Je-Ken Chang, Mei-Ling Ho*, The effect of the local delivery of alendronate on human adipose-derived stem cell-based bone regeneration, Biomaterials, 31:8674-8683,
  22. Rajalakshmanan Eswaramoorthy, Chih-Kuang Wang, Wen-Cheng Chen, Ming-Jer Tang, Mei-Ling Ho, Chi-Ching Hwang, Hui-Min Wang, Chau-Zen Wang*, DDR1 regulates the stabilization of cell surface E-Cadherin and E-Cadherin-mediated cell aggregation, Journal of Cellular Physiology, 224:387-397 , 2010.
  23. Jen-Chyan Wang, Chia-Ling Ko, Chun-Cheng Hung, Yu-Chang Tyan, Chern-Hsiung Lai, Wen-Cheng Chen*, Chih-Kuang Wang, Deriving fast setting properties of tetracalcium phosphate/dicalcium phosphate anhydrous bone cement with nanocrystallites on the reactant surfaces, Journal of Dentistry, 38:158-165, 2010.
  24. Shun-Cheng Wu, Je-Ken Chang, Chih-Kuang Wang, Gwo-Jaw Wang, Mei-Ling Ho*, Enhancement of chondrogenesis of human adipose derived stem cells in a hyaluronan-enriched microenvironment, Biomaterials, 31:631-640, 2010.
  25. Yu-Chang Tyan*, Ming-Hui Yang, Shiang-Bin Jong, Chih-Kuang Wang, Jentaie Shiea, Melamine contamination, Analytical and Bioanalytical Chemistry, 395:729–735, 2009.
  26. C. Chiu*, H.W. Chang, D.W. Chuang, F.R. Chang, Y.C. Chang, Y.S. Cheng, S.S. Lee, Chih-Kuang Wang, Jeff Y.F. Chen, Y.C. Liu, Y.C. Wu, Fern plant-derived protoapigenone leads to DNA damage, apoptosis and G2/M, arrest in lung cancer cell line H1299, DNA and Cell Biology, 28:501-506, 2009.
  27. Chau-Zen Wang, Mei-Ling Ho, Wen-Cheng Chen, Chien-Chih Chiu, Yung-Li Hung, Chih-Kuang Wang*, Shun-Cheng Wu, Characterization and enhancement of chondrogenesis in porous hyaluronic acid-modified scaffolds made of PLGA(75/25) blended with PEI-grafted PLGA(50/50), Materials Science and Engineering C -Materials for Biological Applications, 31:1343-1351, 2011.
  28. Szu-Hsien Chen, Ching-Ting Tsao, Chih-Hao Chang, Yao-Ming Wu, Zheng-Wei Liu, Chun-Pin Lin, Chih-Kuang Wang*, Kuo-Huang Hsieh*, Synthesis and characterization of thermal-responsive chitin-based polyurethane copolymer as a smart material, Carbohydrate Polymers, 88:1483-1487, 2012.
  29. Szu-Hsien Chen, Ching-Ting Tsao, Chih-Hao Chang, Yi-Ting Lai, Ming-Fung Wu, Zheng-Wei Liu, Ching-Nan Chuang, Hung-Chia Chou, Chih-Kuang Wang*, Kuo-Haung Hsieh*, Synthesis and characterization of reinforced poly(ethylene glycol) chitosan-Hydrogel as wound dressing materials, Macromolecular Materials and Engineering, 298:429-438, 2013.
  30. Szu-Hsien Chen, Ching-Ting Tsao, Hung-Chia Chou, Chih-Hao Chang, Ching-Te Hsu, Ching-Nan Chuang, Chih-Kuang Wang*, Kuo-Huang Hsieh*, Synthesis of poly (lactic acid)-based polyurethanes, Polymer International, 62:1159-1168, 2013.
  31. Szu-Hsien Chen, Ching-Ting Tsao, Chih-Hao Chang, Yi-Ting Lai, Ming-Fung Wu, Ching-Nan Chuang, Hung-Chia Chou, Chih-Kuang Wang*, Kuo-Haung Hsieh*, Assessment of reinforced poly(ethylene glycol) chitosan hydrogels as dressings in a mouse skin wound defect model, Materials Science & Engineering C-Materials for Biological Applications, 33:2584-2594, 2013.
  32. Chi-Hung Lee, Szu-Hsien Chen, Yen-Zen Wang, Chao-Chien Lin, Chih-Kai Huang, Ching-Nan Chuang, Chih-Kuang Wang*, Kuo-Huang Hsieh*, Preparation and characterization of proton exchange membranes based on semi-interpenetrating sulfonated poly(imide-siloxane)/epoxy polymer networks, Energy 55:905-915, 2013)
  33. Yin-Chih Fu, Chung-Hwan Chen, Chau-Zen Wang, Yan-Hsiung Wang, Je-Ken Chang, Gwo-Jaw Wang, Mei-Ling Ho*, Chih-Kuang Wang*, Preparation of porous bioceramics using reverse thermo-responsive hydrogels in combination with rhBMP–2 carriers: In Vitro and In Vivo evaluation, Journal of the Mechanical Behavior of Biomedical Materials, 27:64-76, 2013.
  34. I-Chun Tai, Yin-Chih Fu, Chih-Kuang Wang, Je-Ken Chang, Mei-Ling Ho*, Local delivery of controlled-release simvastatin/PLGA/HAp microspheres enhances bone repair, International Journal of Nanomedicine, 8:3895-3905, 2013.
  35. Yan-Hsiung Wang, Yin-Chih Fu, Hui-Chi Chiu, Chau-Zen Wang, Shao-Ping Lo, Mei-Lin Ho, Po-Len Liu, Chih-Kuang Wang*, Cationic nanoparticles with quaternary ammonium functionalized PLGA-PEG-based copolymers for potent gene transfection, Journal of Nanoparticle Research, 15:2077-2092, 2013.
  36. Zheng-Wei Liu, Hung-Chia Chou, Szu-Hsien Chen, Ching-Ting Tsao, Ching-Nan Chuang, Li-Chiun Cheng, Chen-Han Yang, Chih-Kuang Wang* and Kuo Huang Hsieh*, Mechanical and thermal properties of thermoplastic polyurethane-toughened polylactide-based nanocomposites, Polymer Composites, 35:1744-1757, 2014.
  37. Chau-Zen Wang, Yin-Chih Fu, Yan-Hsiung Wang, Po-Len Liu, Shih-Ciang Jian, Mei-Ling Ho, Chih-Kuang Wang*, Synthesis and characterization of cationic polymeric nanoparticles as simvastatin carriers for enhancing the osteogenesis of bone marrow mesenchymal stem cells, Journal of Colloid and Interface Science, 432:190-199, 2014.
  38. Yin-Chih Fu, Tzu-Fun Fu, Hung-Jen Wang, Che-Wei Lin, Shun-Cheng Wu, Gang-Hui Lee, Chih-Kuang Wang*, Aspartic acid based modified PLGA-PEG nanoparticles for bone targeting: in vitro and in vivo evaluations, Acta Biomaterialia, 10:4583-4596,
  39. Wei-Yao Chang, Szu-Hsien Chen, Cheng-Han Yang, Ching-Nan Chuang, Chih-Kuang Wang* and Kuo-Huang Hsieh**, Preparation and characterization of aromatic polyimides derived from 4,4’-oxydiphthalic anhydride and 4,4′-diaminodiphenylmethane with different alkyl substituents, Journal of Polymer Research, 22:38-46, 2015.
  40. Cheng-Han Yang, Szu-Hsien Chen, Yun-Wen Pan, Ching-Nan Chuang, Wen-Chi Chao, Tai-Horng Young, Wen-Yen Chiu, Chih-Kuang Wang*, Kuo-Huang Hsieh*, Preparation and characterization of methoxy-poly(ethylene glycol) side chain grafted onto chitosan as a wound dressing film, Journal of Applied Polymer Science, 132: 42340-42348 2015.
  41. Yin-Chih Fu, Yan-Hsiung Wang, Chung-Hwan Chen, Chih-Kuang Wang, Gwo-Jaw Wang, Mei-Ling Ho*, Combination of calcium sulfate and simvastatin-controlled release microspheres enhances bone repair in critical-sized rat calvarial bone defects, International Journal of Nanomedicine, 10:1-10,
  42. Wei-Yao Chang, Ching-Nan Chuang, Szu-Hsien Chen, Chih-Kuang Wang*, Kuo-Huang Hsieh*, Preparation and characterization of nano-hybrids combining poly(urea-imide) with a porous silica-pillared layered phase, Journal of Polymer Research, 22:205-214, 2015.
  43. Wei-Yao Chang, Yun-Wen Pan, Jian-Jhang Guo, Ching-Nan Chuang, Szu-Hsien Chen, Chih-Kuang Wang*, Kuo-Huang Hsieh*, Fabrication and Characterization of Waterborne Polyurethane (WPU) with Aluminum Trihydroxide (ATH) and Mica as Flame Retardants, Journal of Polymer Research, 22:243-252, 2015.
  44. Yao-Hsien Wang, Eswaramoorthy Rajalakshmanan, Chih-Kuang Wang, Chung-Hwan Chen, Yin-Chih Fu, Tzu-Lin Tsai, Je-Ken Chang, Mei-Ling Ho*, PLGA-linked alendronate enhances bone repair in diaphysis defect model, Journal of Tissue Engineering and Regenerative Medicine, 11:2603-2612, 2017.
  45. Feng-Wei Lin, Pin-Yuan Chen, Kuo-Chen Wei, Chiung-Yin Huang, Chih-Kuang Wang, Hung-Wei Yang*, Rapid In Situ MRI Traceable Gel-forming Dual-drug Delivery for Synergistic Therapy of Brain Tumor. Theranostics, 2017; 7(9): 2524-2536.
  46. Tien-Ching Lee+, Yan-Hsiung Wang+, Shih-Hao Huang, Chung-Hwan Chen, Mei-Ling Ho, Yin-Chih Fu*, Chih-Kuang Wang*, Evaluations of Clinical-Grade Bone Substitute-Combined Simvastatin Carriers to Enhance Bone Growth: in vitro and in vivo analyses, Journal of Bioactive and Compatible Polymers, 2018; 33: 160-177.
  47. Chau-Zen Wang; Rajalakshmanan Eswaramoorthy; Tzu-Hsiang Lin; Chung-Hwan Chen; Yin-Chih Fu; Chih-Kuang Wang; Shun-Cheng Wu; Gwo-Jaw Wang; Je-Ken Chang#*; Mei-Ling Ho#*, Enhancement of chondrogenesis of adipose-derived stem cells in HA-PNIPAAm-CL hydrogel for cartilage regeneration in rabbits, Scientific Reports,8: 10526-10538, 2018.
  48. Chih-Ling Huang, Wan-Ru Hsieh, Che-Wei Lin, Hung-Wei Yang, and Chih-Kuang Wang*, Multifunctional liposomal drug delivery with dual probes of magnetic resonance and fluorescence imaging, Ceramics International 44: 12442–12450, 2018.
  49. I Hao Chen, Ching Ming Chien, Chun Ting Wang,  Chih Ling Huang *, Chih Kuang Wang, Yur Ren Kuo, Development for Wound Dressing Based on Blended Chitosan and Gelatin Hydrogels”, Key Engineering Materials, 765:119-123, 2018.
  50. Chih-Ling Huang, Chih-Chiang Weng, Chih-Hung Liu, Chao-Tang Chuang, Li-Cheng Pana, Yi-Zhen Li, and Chih-Kuang Wang*, Sterilization Efficacy of Biological Indicator by Lower 40 Celsius Temperature Plasma Processes, International Journal of Automation and Smart Technology, 8:161-166 (2018)
  51. Chau-Zen Wang, Yan-Hsiung Wang, Tien-Ching Lee, Yin-Chih Fu, Mei-Ling Ho, Chih-Kuang Wang*, Combination of bioceramic scaffold and simvastatins nanocarriers as a synthetic alternative to autologous bone grafting, International Journal of Molecular Sciences, 19: 4099-4118, 2018.
  52. Yi-An Cheng, Tung-Ho Wu, Yun-Ming Wang, Tian-Lu Cheng, I-Ju Chen, Yun-Chi Lu, Kuo-Hsiang Chuang, Chih-Kuang Wang, Chiao-Yun Chen, Rui-An Lin, Huei-Jen Chen, Tzu-Yi Liao, En-Shuo Liu & Fang-Ming Chen. “Humanized bispecific antibody (mPEG × HER2) rapidly confers PEGylated nanoparticles tumor specificity for multimodality imaging in breast cancer.” Journal of Nanobiotechnology18, 118-130 (2020).
  53. Che-Wei Lin, Yu-Feng Su, Chih-Yun Lee, Lin Kang, Yan-Hsiung Wang, Sung-Yen Lin, Chih-Kuang Wang*, 3D printed bioceramics fabricated using negative thermoresponsive hydrogels and silicone oil sealing to promote bone formation in calvarial defects, Ceramics International, 47, 5464-5476, 2021.
  54. Swathi Nedunchezian, Parikshit Banerjee, Chih-Yun Lee, Su-Shin Lee, Che-Wei Lin, Che-Wei Wu, Shun-Cheng Wu, Je-Ken Chang, Chih-Kuang Wang*, Generating adipose stem cell-laden hyaluronic acid-based scaffolds using 3D bioprinting via the double crosslinked strategy for chondrogenesis, Materials Science and Engineering: C, 124, 112072, 2021.
  55. Swathi Nedunchezian, Che-Wei Wu, Shung-Cheng Wu, Chung-Hwan ChenJe-Ken Chang, Chih-Kuang Wang*, Polymers, 14, 2003, 2022.
  56. Che-Wei Lin, Chih-Yun Lee, Sung-Yen Lin, Lin Kang, Yin-Chih Fu, Chung-Hwan Chen, Chih-Kuang Wang*, Bone targeting nanoparticles of dendritic (aspartic acid)3-functionalized PEG-PLGA biopolymer encapsulated simvastatin treated for the osteoporosis rat models, International Journal of Molecular Sciences, 2022, 23, 10530.
  57. Zheng-Ian Lin, Han-Lin Tsai, Guan-Lin Liu, Xie-Hong Lu, Pei-Wen Cheng, Pei-Ling Chi, Chih-Kuang Wang, Tzu-Hsien Tsai, Chih-Chia Wang, Jason Hsiao Chun Yang, Bao-Tsan Ko, Chih-Kuang Chen, Preparation of CO2-Based Cationic Polycarbonate/Polyacrylonitrile Nanofibers with an Optimal Fibrous Microstructure for Antibacterial Applications, Macromolecular Bioscience, 22(10), 2200178, 2022.
  58. Yu-Sheng Tseng, Yun-Han Su, Chia-Lin Chen, Ji Zhang, Chih-Kuang Wang, Dorian Amir Henry Hanaor, and Wen-Fan Chen*, Bioceramics in the CaMgSi2O6–Li2O System: A Glass-Ceramic Strategy for Excellent Mechanical Strength and Enhanced Bioactivity by Spontaneous Elemental Redistribution. Advanced Materials Interfaces,10 (12), 2202491, 2023.
  59. Chiu-Fang Chen, Szu-Hsien Chen, Rong-Fu Chen, Keng-Fan Liu, Yur-Ren Kuo, Chih-Kuang Wang, Tzer-Min Lee*, and Yan-Hsiung Wang*, “A Multifunctional Polyethylene Glycol/Triethoxysilane-Modified Polyurethane Foam Dressing with High Absorbency and Antiadhesion Properties Promotes Diabetic Wound Healing” International Journal of Molecular Sciences24, no. 15: 12506, 2023.
  60. Chih-Yun Lee, Swathi Nedunchezian, Sung-Yen Lin, Yu-Feng Su, Che-Wei Wu, Shun-Cheng Wu, Chung-Hwan Chen, Chih-Kuang Wang*, Bilayer osteochondral graft in rabbit xenogeneic transplantation model comprising sintered 3D-printed bioceramic and human adipose-derived stem cells laden biohydrogel, Journal of Biological Engineering,17,74, 2023.
  61. Pavanchandh Atturu, Sunaina Mudigonda, Chau-Zen Wang, Shun-Cheng Wu, Jhen-Wei Chen, Mary Fornica Francis Forgia, Hans-Uwe Dahms, Chih-Kuang Wang*, Adipose-derived stem cells loaded photocurable and bio printable bioinks composed of Methacrylated Gelatin, Methacrylated Hyaluronic acid and Polyethylene glycol diacrylate crosslinker to differentiate into smooth muscle phenotype, International Journal of Biological Macromolecules, 265: 130710, 2024.
  62. Sunaina Mudigonda, Pavanchandh Atturu, Hans-Uwe Dahms*, Jiang-Shiou Hwang, Chih-Kuang Wang, Evaluation of antibiofilm activity of metal oxides nanoparticles and carbon nanotubes coated styrofoam on the bacterium Jeotgalicoccus huakuii, Water Research, 259: 121810, 2024.
  63. Yu-Sheng Tseng, Wei-Hsi Chang, Yu-Jui Cheng, Chih-Kuang Wang and Wen-Fan Chen*, Porous Hydroxyapatite Bioscaffolds via Hybrid FDM-DLP 3D Printing with Porogen Engineering, International Journal of Clinical Medicine and Bioengineering, 2024, 4, 1-10.
  64. Pavanchandh Atturu, Su-Shin Lee, Po-Chih Chang, Kevin Chiou, Chih-Kuang Wang*, Silanized acrylic graphene oxide nanosheets reinforced mechanically tunable GelMA/HAMA printable bioink for mature smooth muscle cell, Biomaterials Advances 171, 214226, 2025.
  65. Chia-Hao Hsu, Chih-Kuang Wang, Yan-Hsiung Wang, Sung-Yen Lin, Cheng-Chang Lu, Yin-Chih Fu, Hsuan-Ti Huang, Chung-Hwan Chen, Pei-Hsi Chou*, Engagement and Stress Concentration Evaluation of a Novel Two-Part Compression Screw: A Preliminary Finite Element Analysis, Bioengineering, 2025, 12, 483.
  66. Sunaina Mudigonda, Pavanchandh Atturu, Chih-Kuang Wang, Hans Uwe Dahms, Yu-Ying Chao, Yeou-Lih Huang*, Simultaneous removal of multiple heavy metal ions from simulated wastewater using Nanoceria-Carbon Nanotubes infused three-dimensional novel cryogels, Journal of Water Processing Engineering, (2026), 81, 109376.
  67. Yu-Wei Kang; Po-Tang Chen; Chih-Kuang Wang; Kevin Chiou*, Water-soluble 3D printing resin from dimethylacrylamide and 4-acryloylmorpholine monomers. J Polym Res33, 107 (2026).
  68. Sung-Yen Lin, Chih-Yun Lee, Yen-Han Lai, Wen-Fan Chen, Cheng-Tang Pan, Yu-Shun Cheng, Chung-Hwan Chen, Chih-Kuang Wang*, CT/FEA-optimized Ti6Al4V bone plate combined with a porous 3D β-TCP cage for repair of segmental tibial defects in rabbits, Materials Science in Additive Manufacturing 026120019.
  69. Yen-Han Lai, Suhana, Su-Shin Lee, Ke-Hsun Yang, Yi-Chia Wu, Pavanchandh Atturu, Chung-Yuan Chan, Chih-Kuang Wang *, Photocured hybrid hydrogels as programmable platforms and scaffolds to enhance stem cell-derived extracellular vesicles for wound healing, Biomaterials Science, 2026, 14, 4231 – 4258.
  70. Yu-Feng Su, Chih-Yun Lee, Yen-Han Lai, Sung-Yen Lin, Chung-Hwan Chen, Yin-Chih Fu, Chih-Kuang Wang*, 3D-Printed Bioceramic Burr Hole Covers for Calvarial bone Defect Repair: Preclinical Evaluation in Pig and Rabbit Models, ACS Biomaterials Science & Engineering, 12, 4398−4415, 2026.

國內會議論文

1993

  1. 王志光, 鄭鴻毅, 陳瑾惠, 朱建平*, “短碳纖/碳化矽複合材料之製程及磨耗研究製程及性質研究”, 中國材料科學學會82年年會, 82年4月日30至5月1日, 國立交通大學, 新竹, 台灣, 中華民國, 5-11, 1993。
  2. 鄭鴻毅, 王志光, 陳瑾惠, 朱建平*, “短碳纖/碳化矽複合材料之製程及磨耗研究磨耗行為”, 中國材料科學學會82年年會, 82年4月30日至5月1日, 國立交通大學, 新竹, 台灣, 中華民國, 5-13, 1993。

1994

  1. 王志光, 朱建平, 陳瑾惠*, “生醫玻璃及石英強化氫氧基磷灰石研究”, 中國材料科學學會83年年會, 83年4月, 國立中山大學, 高雄, 台灣, 中華民國, pp. 380-381, 1994。
  2. 王志光, 朱建平, 陳瑾惠*, “添加生醫玻璃對氫氧基磷灰石燒結強度及微結構之影響”, 中華民國83年醫學工程科技研討會, 國立陽明大學, 台北, 台灣, 中華民國, pp.218-219, 1994。

1995

  1. 王志光, 朱建平, 陳瑾惠*, “雷射蒸鍍結晶性氫氧基磷灰石薄膜於鈦基材微結構性質研究”, 中華民國84年醫學工程科技研討會, 國立成功大學, 台南, 台灣, 中華民國, pp.300-301, 1995。

1997

  1. 陳瑾惠, 王志光, 朱建平*, “雷射蒸鍍氫氧基磷灰石薄膜結構、性質及熱處理之影響”, 中國材料科學學會86年年會, 國立成功大學, 台南, 台灣, 中華民國, pp. J1-4, 1997。
  2. 朱建平, 王志光, 陳瑾惠*, “添加生物活性玻璃對氫氧基磷灰石燒結體結構及性質影響”, 中國材料科學學會86年年會, 國立成功大學, 台南, 台灣, 中華民國, pp. J17-20, 1997。

2001

  1. 王志光*, 許富銀, 闕山璋, “時效溫度對磷灰石析出及熱穩定研究”, 中國材料科學學會90年年會, 90年11月, 國立中興大學, 台中, 台灣, 中華民國, P05, 2001。

2003

  1. 王志光*, 廖駿偉, 張仕欣, 蕭祝螽, 簡育菁, 謝玉霞, 朱時梁, “微波電漿改質奈米二氧化鈦之可見光觸媒特性研究”, 微波電漿奈米製程應用研討會, 92年11月, 經濟部能源委員會, 高雄, 台灣, 中華民國, 4-1, 2003。

2005

  1. 吳順成, 何美泠, 王志光, 王國照*, “Cell adhesion of adipose derived stem cells on three-dimensional poly DL-lactic-co-glycolic acid scaffold with different pore size”, 中華民國骨科醫學會94年年會, 94年10月18日, 台北榮民總醫院, 台北, 台灣, 中華民國, 2005。
  2. 王志光*, 陳嘉祥, 陳怡伶, 陳惠亭, 傅尹志, 王國照, 何美泠, “新型核殼複合微粒包覆蛋白質之研究”, 中國材料科學學會94年年會, 94年11月25-26日, 私立淡江大學, 台北, 台灣, 中華民國, 2005。
  3. 王志光*, 利宛芸, 陳泊余, “氫氧基磷灰石包覆奈米金之殼層複合材料特性研究”, 中國材料科學學會94年年會, 94年11月25-26日, 私立淡江大學, 台北, 台灣, 中華民國, 2005。
  4. 王志光*, 陳虹年, 吳順成, 傅尹志, 王國照, 何美泠, “乳化法形成磷酸鈣生物陶瓷微米球之特性研究”, 中國材料科學學會94年年會, 94年11月25-26日, 私立淡江大學, 台北, 台灣, 中華民國, 2005。

2006

  1. S.C. Wu, J.K. Chang, C.K. Wang, I.C. Ting, G.J. Wang, M.L. Ho*, “Cytocompatibility of a noval hyaluronic acid modified biodegradable scaffold with human adipose derived stem cells for application of cartilage tissue engineering”, International Symposium on Recent Advances in Stem Cell Research & 2006 Annual Meeting of Taiwan Society for Stem Cell Research, 95年9月1-2日, 台北醫學大學, 台北, 台灣, 中華民國, 2006。
  2. 王志光*, 傅尹志, 吳欣蓓, 陳怡伶, 何美泠, “二次微乳化法製備PLGA微小球包覆蛋白質之製程與體外釋放研究”, 中國材料科學學會96年年會, 95年11月24-25日, 國立成功大學, 台南, 台灣, 中華民國, 2006。
  3. 王志光*, 丁奕誠, 吳順成, 何美泠, “透明質酸修飾多孔性PLGA支架製程研究與細胞毒性評估”, 中國材料科學學會95年年會, 95年11月, 國立成功大學, 台南, 台灣, 中華民國, 2006。

2007

  1. S.C. Wu, J.K. Chang, C.K. Wang, I.C. Ting, G.J. Wang, M.L. Ho, Cytocompatibility of a noval hyaluronic acid modified biodegradable scaffold with human adipose derived stem cells for application of cartilage tissue engineering, Physiology Symposium 2007, Taipei, Taiwan, March 30-31, 2007.
  2. Y.C. Fu*, C.K. Wang, G.T. Lin, M.L. Ho, Developing new biodegradable carrier product for control release of growth factor, 中華民國骨科醫學會96年度學術研討會, 96年10月27-28日, 長庚大學, 桃園, 台灣, 中華民國, 2007。
  3. 傅尹志*, 何美泠, 王志光, 王志華, Optimized Bone Regeneration Based on Sustained Release from Three-Dimensional Fibrous PLGA/HAp Composite Scaffolds Loaded with BMP-2, 骨科醫學會第53次聯合學術研討會, 96年10月27-28日, 長庚大學, 桃園, 台灣, 中華民國, 2007。
  4. 陳惠亭*, 張彣伊, 吳珮綾, 陳建勳, 傅尹志, 王志光, 何美泠, 王國照, Poly(lactide-co-glycolide)/Hydroxylapatite Composite Scaffolds as Protein Drug Delivery System, 2007台灣藥學會年會, 96年12月08日, 高雄, 台灣, 中華民國, 2007。
  5. 林子群, 何美泠, 陳思賢, 吳順成, 王志光*, “鑄造鹽洗法製作多孔性PLGA-PEI-HA高分子支架特性評估”, 生物醫學工程2007年研討會, 96年12月14-15日, 逢甲大學, 台中, 台灣, 中華民國, 2007。
  6. C.H. Yang, S.H. Chen, S.C. Wang, P.S. Cheng, C.K. Wang*, “Preparation and Characterization of Al2O3/Epoxy Nanocomposites via In-situ Polymerization”, 中國化學會96年年會, 96年12月, 國立清華大學, 新竹, 台灣, 中華民國, 2007。

2008

  1. Y.C. Fu, C.K. Wang, J.K. Chang, M.L. Ho, Development of novel control release system of bone graft for biological activity materials, 中華民國骨科醫學會97年度學術研討會, 97年10月25-26日, 長庚大學, 桃園, 台灣, 中華民國, 2008。
  2. C.K. Wang*, Shang-Ren Huang, Yi-Jie Li, Study of Novel Biodegradable Nanoparticle for Bone-Targeted Carrier based on dendrimer oligopeptides of aspartic acid, PEG and PLGA, 中國化學會97年年會, 97年12月5-7日, 國立彰化大學, 彰化, 台灣, 中華民國, 2008。
  3. L.R. Jheng, S.H. Chen, C.K. Wang, P.S. Cheng*, Synthesis and Properties of WPU/Epoxy/MTMS/Colloid Al2O3 Organic/Inorganic Nanocomposites Materials, 中國化學會97年年會, 97年12月5-7日, 國立彰化師範大學, 彰化, 台灣, 中華民國, 2008。
  4. 傅尹志, 蔡宗憲, 陳思賢, 何美泠, 鄭寶樹, 王志光*, 新熱敏感型多孔水膠支架之製備與性質, 生物醫學工程2008年研討會, 97年12月12-13日, 長庚大學, 桃園, 台灣, 中華民國, 2008。
  5. S.C. Wang, S.H. Chen, Y.J. Li, C.K. Wang, P.S. Cheng*, The research of synthesis of the novel organic anti-static and transparent polymer/SiO2 nano-hybrid film, 中國化學會97年年會, 97年12月, 國立彰化師範大學, 彰化, 台灣, 中華民國, 2008。

2009

  1. 羅紹萍, 陳炳宏, 王志光*, Novel micelle-like nanoparticles made from cationic molecules grafted PLGA copolymers for gene transfection, 中國化學會98年年會, 98年12月4-6日, 義守大學, 高雄, 台灣, 中華民國, 2009。
  2. 王志光*, 傅尹志, 何美泠, 史秉修, 郭怡君, 體溫感應型生物水膠支架之製備與性質, 生物醫學工程2009年研討會, 98年12月11-12日, 陽明大學, 台北, 台灣, 中華民國, 2009。

2010

  1. 陳立瑋, 史秉修, 傅尹志, 王志光*, Preparation and Characterization of Thermo-responsive Hydrogels on Polylysine mediate Hyaluronic Acid, 中國化學會99年年會, 99年12月3-5日, 台灣大學, 台北, 台灣, 中華民國, 2010。
  2. 簡士強, 傅尹志, 陳立瑋, 何美泠, 王昭仁, 王志光*, 溫感水膠製備多孔性生物陶瓷複合藥物奈米載體於骨礦化之研究, 生物醫學工程2010年研討會, 99年12月10-11日, 義守大學, 高雄, 台灣, 中華民國, 2010。

2011

  1. Li-Wen Chen, Ping-Hsiu Shih, Yin-Chih Fu, Chih-Kuang Wang*, Thermo-sensitive hydrogel scaffold of poly(N-isopropylacrylamide) base on 3D cell culture applications, 生物醫學工程2011年研討會, 100年8月18-20日, 成功大學, 台南, 台灣, 中華民國, 2011。
  2. 王志光, 傅尹志, 何美泠, 戴亦辰, 史秉修, 鄭添祿, 具PEG免疫抗體標的的奈米 PEG-PLGA基質載體之研究, 2011國際臨床工程及醫學資訊研討會暨國科會醫學工程學門成果發表會, 100年12月3日, 成功大學, 台南, 台灣, 中華民國, 2011。
  3. Szu Hsien Chen, Zheng-Wei Liu, Ching-Ting Tsao, Chih-Kuang Wang, Kuo-Kuang Hsieh*, Synthesis of thermal-responsive chitin-based polyurethane as a smart material, 2011 Annual Meeting of Taiwan Society for Chitin and Chitosan, Taiwan.

2012

  1. 潘力誠, 王志光*, 劉伯侖, 鄭添祿, 傅尹志, 具PEG免疫抗體標的的奈米PEG-PLGA基質載體之研究, 中華民國生醫材料及藥物制放學會2012年會暨研討會, 101年04月28日, 台北醫學大學, 台北, 中華民國, 2012。
  2. 傅尹志, 林佳慧, 王彥雄, 王昭仁, 何美泠, 王志光*, 新式陽離子型兩性生醫高分子(Bis(PLGA-phe-PEG)-qDETA)攜帶親脂性藥物之奈米粒子特性評估, 2012生物醫學工程科技研討會暨國科會醫學工程學門成果發表會, 101年11月17-18日, 中原大學, 桃園, 中華民國, 2012。
  3. 王宏仁, 林哲緯, 傅尹志, 傅子芳, 何美泠, 王志光*, 天門冬胺酸修飾PLGA-g-PEG高分子作為骨標靶奈米載體之合成與性質研究, 2012生物醫學工程科技研討會暨國科會醫學工程學門成果發表會, 101年11月17-18日, 中原大學, 桃園, 中華民國, 2012。
  4. Y.C. Fu, C.H. Chen, S.C. Chien, J.K. Chang, M.L. Ho, C.K. Wang, Porous bioceramics were fabricated using reversed thermo-responsive hydrogel as template and combined with rhBMP-2 carriers, 12th Asian BioCeramics Symposium, 101年11月18-21日, National Cheng Kung University (NCKU), Tainan, 2012.

2013

  1. 王耀賢, 路卡曼, 王志光, 蔡紫琳, 劉瓊月, 張瑞根, 何美泠, PLGA-alendronate enhances bone repair in femoral bone defect in rats, 2013 Annual Meeting of Formosa Association of Regenerative Medicine, Taipei, Taiwan, Mar. 2, 2013.
  2. 潘力誠, 王志光*, 鄭添祿, PEG修飾奈米金桿與具PEG抗體癌細胞之體外辨識與光熱治療研究, 中華民國生醫材料及藥物制放學會2013年會暨國科會醫工學門成果發表會, 103年05月4-5日, 義守大學, 高雄, 中華民國, 2013。
  3. 林佳慧, 王志光*, 奈米金桿作為螢光共振能量轉移系統之螢光探針應用在早期骨關節炎診斷研究, 中華民國生醫材料及藥物制放學會2013年會暨國科會醫工學門成果發表會, 102年05月4-5日, 義守大學, 高雄, 中華民國, 2013。
  4. 潘力誠, 林宏哲, 王志光*, 鄭添祿, 含影像探針與聚乙二醇抗體標靶之藥物奈米載體合成與性質研究, 2013生物醫學工程科技研討會暨國科會醫學工程學門成果發表會, 102年11月15-16日, 清華大學, 新竹, 中華民國, 2013。
  5. 王宏仁, 林哲緯, 傅尹志, 傅子芳, 何美泠, 王志光*, 天門冬胺酸寡聚胜肽修飾PLGA-PEG高分子作為骨標靶奈米載體在生物體內性質評估, 2013生物醫學工程科技研討會暨國科會醫學工程學門成果發表會, 102年11月15-16日, 清華大學, 新竹, 中華民國, 2013。

2014

  1. 潘力誠, 林宏哲, 王志光*, 鄭添祿, Study of bifunctional polymeric nanoparticles with gold nanocluster image probe and anti-PEG tumour-targeted drug delivery, 2014年中華民國生醫材料及藥物制放年會, 103年05月02日, 清華大學, 新竹, 中華民國, 2014。
  2. 王宏仁, 林哲緯, 傅尹志, 傅子芳, 何美泠, 王志光*, Oligopeptide of aspartic acid modify PLGA-PEG nanoparticles for bone targeting in vivo evaluation, 2014年中華民國生醫材料及藥物制放年會, 103年05月02日, 清華大學, 新竹, 中華民國, 2014。
  3. 王志光*, 李之昀, 洪偉晨, 陳崇桓, 全金螢光共振能量轉移系統作近紅外光對比劑應用在骨關節炎探針, 2014年科技部工程司醫工學門成果發表會, 103年12月06日, 陽明大學, 台北市, 中華民國, 2014。
  4. 王志光, 傅尹志*, 王彥雄, 何美泠, 王昭仁, 臨床級人工骨材合併simvastatin載體對促進骨生長之加值性研究, 2014年科技部工程司醫工學門成果發表會, 2014年12月06日, 陽明大學, 台北市, 中華民國。
  5. 李之昀, 林佳慧, 王志光*, 全金螢光共振能量轉移新系統模式作為近紅外光對比劑應用在早期骨關節炎診斷, 2014中華民國生物醫學工程創意競賽, 高雄市路竹科學園區, 高雄市, 中華民國, 2014。（佳作獎）

2015

  1. Chih-Kuang Wang, Tien-Ching Lee, Yan-Hsiung Wang, Shih-Hao Huang, Mei-Ling Ho, Yin-Chih Fu*, In vivo Evaluations of the Clinical Grade Bone Substitute Combined Simvastatin Carriers on Enhance Bone Growth, 2015 SEMBA生醫工程應用研討會, 2015年01月31日, 蓮潭會館, 高雄市, 中華民國。（最佳論文獎）
  2. Chih-Yun Lee, Wei-Chen Hung, Chung-Hwan Chen, and Chih-Kuang Wang, Matrix metalloproteinase-13 activatable all gold Forster resonance energy transfer (AG-FRET) substrate probes for inflammatory arthritis, 5th Asian Biomaterials Congress (ABMC5), May 6-9, Taipei, Taiwan, 2015.
  3. 李之昀, 洪偉晨, 陳崇桓, 王志光, A Disintegrin and Metalloproteinase with Thrombospondin repeats-4 activatable all gold Forster resonance energy transfer (AG-FRET) substrate probes for inflammatory arthritis, 2015生物醫學工程科技研討會暨科技部工程司醫工學門成果發表會, 104年11月13-14日, 台灣大學, 台北市, 中華民國, 2015。（生醫感測－學生壁報論文競賽獲得優等獎）

2016

  1. 董國龍, 潘力誠, 王彥雄, 王志光*, 可逆式負溫感水膠應用於釔安定氧化鋯(YSZ)之燒結性質研究, 2016年台灣陶瓷學會年會暨科技部專題研究計畫成果發表會, 105年5月20-21日, 國立屏東科技大學, 屏東, 中華民國, 2016。
  2. 林哲緯, 洪偉晨, 李之昀, 陳崇桓, 王志光*, Probing Cathepsin K activity with a selective substrate of all gold Forster resonance energy transfer (AG-FRET) is associated with Arthritis, 2016生物醫學工程科技研討會暨科技部工程司醫工學門成果發表會, 105年8月17-19日, 陽明大學, 台北市, 中華民國, 2016。
  3. 謝宛汝, 林哲緯, 胡乃文, 劉伯侖, 王志光*, Dual probes of magnetic resonance imaging and fluorescence imaging, 2016生物醫學工程科技研討會暨科技部工程司醫工學門成果發表會, 105年8月17-19日, 陽明大學, 台北市, 中華民國, 2016。
  4. Che-Wei Lin, Wei-Chen Hung, Chih-Yun Lee, Chung-Hwan Chen, Chih-Kuang Wang*, Probing Cathepsin K activity with a selective substrate of all gold Forster resonance energy transfer (AG-FRET) is associated with arthritis, Tissue Engineering & Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP), 105年9月3-6日, 淡水鎮, 新北市, 中華民國, 2016。
  5. Wan-Ju Hsieh, Che-Wei Lin, Nai-Wen Hu, Po-Len Liu, Chin-Kuang Wang*, Multifunctional liposome drug delivery system incorporated with dual probes of magnetic resonance imaging and fluorescence imaging, Tissue Engineering & Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP), 105年9月3-6日, 淡水鎮, 新北市, 中華民國, 2016。
  6. Kuo-Lung Tung, Li-Cheng Pan, Yan-Hsiung Wang, Chih-Kuang Wang*, Fabrication and characteristic of Yttria-stabilized zirconia using negative thermo-responsive hydrogel, Tissue Engineering & Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP), 105年9月3-6日, 淡水鎮, 新北市, 中華民國, 2016。

2017

  1. Wan-Ru Hsieh, Chih-Ling Huang, Che-Wei Lin, Hung-Wei Yang, Chih-Kuang Wang, Novel liposomal drug nanocarrier with dual probes of magnetic resonance and fluorescence imaging, The 6th International Conference on Bio-based Polymers (ICBP2017), May 14-17, 2017, Yuan Ze University, Taiwan.
  2. Chao-Tang Chuang, Li-Cheng Pan, Yu-Feng Su, Yan-Hsiung Wang, Kuo-Lung Tung and Chih-Kuang Wang, Bone regeneration in calvarial defect using 3D printed bioactive ceramic scaffolds, 2017 International Symposium of Materials on Regenerative Medicine (ISOMRM), August 23-26, 2017, Taoyuan, Taiwan.
  3. Chao-Tang Chuang, Li-Cheng Pan, Yu-Feng Su, Yan-Hsiung Wang, Kuo-Lung Tung, Chih-Kuang Wang*, 3D bioceramic scaffolds fabricated using negative thermo-responsive hydrogels for promoting bone formation in calvarial defect, Biomedical Engineering Society (BMES) 2017, National Central University, Taoyuan, Taiwan.
  4. Kuo-Lung Tung, Li-Cheng Pan, Yan-Hsiung Wang, Chao-Tang Chuang, Chih-Kuang Wang, Fabrication and Characterization of Yttria-stabilized Zirconia Using Negative Thermo-responsive Hydrogel for dental prosthesis, Biomedical Engineering Society (BMES) 2017, National Central University, Taoyuan, Taiwan.

2018

  1. Chao-Tang Chuang, Li-Cheng Pan, Yu-Feng Su, Yan-Hsiung Wang, Kuo-Lung Tung and Chih-Kuang Wang, 3D bioceramic scaffolds fabricated using negative thermo-responsive hydrogels for promoting bone formation in calvarial defect, 中華民國生醫材料及藥物制放年會, 107年03月23日, 高雄醫學大學, 高雄, 2018.
  2. Che-Wei Lin, Chih-Kuang Wang, Study of Bone Targeting Nanoparticles of (Aspartic Acid)3-PEG-PLGA Carry Simvastatin for Osteoporosis Model of Disuse Rat, 中華民國生醫材料及藥物制放年會, 107年03月23日, 高雄醫學大學, 高雄, 2018.

2019

  1. Che-Wei Lin, Chih-Kuang Wang, Targeting Nanoparticles of (Aspartic Acid)3-PEG-PLGA Carry Simvastatin for Osteoporosis, 中華民國生醫材料及藥物制放年會, 2019年03月28-29日, 清華大學, 新竹, 台灣.
  2. Che-Wei Lin, Chih-Kuang Wang, Targeting Nanoparticles of (Aspartic Acid)3-PEG-PLGA Carry Simvastatin for Osteoporosis, 9th WACBE World Congress on Bioengineering (WACBE 2019), Taipei, Taiwan, August 16-19, 2019.
  3. Nai-Wen Hu, Parikshit Banerjee, Zhe-Wei Lin, Chih-Kuang Wang, 3D printing of PCL/PLGA ear shape scaffold laden with adipose-derived stem cells incubated in hyaluronic acid-based hydrogels for external ear tissue reconstruction, 9th WACBE World Congress on Bioengineering (WACBE 2019), Taipei, Taiwan, August 16-19, 2019.

2020

  1. Swathi Nedunchezian, Parikshit Banerjee, 顏鼎龍, 王志光*, 3D bioprinting of double cross-linked HA/alginate hydrogel for chondrogenesis effect, 中華民國生醫材料及藥物制放年會, 2020年03月28-29日, 陽明大學, 台北, 台灣.
  2. Chih-Yun Lee, Che-Wei Lin, Yu-Feng Su, Yan-Hsiung Wang, Sung-Yen Lin, Chih-Kuang Wang*, 3D printing of bioceramic scaffolds fabricated using negative thermo-responsive hydrogels for promoting bone formation, The 4th Global Conference on Biomedical Engineering & Annual Meeting of TSBME (GCBME 2020), Taipei, Taiwan, Nov. 12-14, 2020.
  3. Swathi Nedunchezian, Chih-Kuang Wang*, Adipose-derived stem cells laden into HAMA/GelMA photo-cured based hydrogel to build a 3D biomimetic scaffold for Cartilage Tissue reengineering, The 4th Global Conference on Biomedical Engineering & Annual Meeting of TSBME (GCBME 2020), Taipei, Taiwan, Nov. 12-14, 2020.

2021

  1. Swathi Nedunchezian, Chih-Kuang Wang*, Adipose-derived stem cells laden into HAMA/GelMA Photo cured based hydrogel to build a 3D biomimetic scaffold for cartilage tissue reengineering, Regenerative Medicine with Cells and Cell Derivatives / 2021 Annual Meeting of FARM, New Taipei City, Taiwan, March 27, 2021.
  2. Atturu Pavanchandh, Chih-Kuang Wang*, Study of photocurable bioprinted bioinks using PEGDA/GelMA/HAMA hybrid hydrogel for myogenesis, 2021 Annual Meeting of Taiwanese Society of Biomedical Engineering (TSBME 2021), Taichung, Taiwan, Nov. 19-20, 2021.
  3. Swathi Nedunchezian, Chih-Kuang Wang*, Development of hybrid hydrogel incorporated with inorganic nanostructure crosslinker to build a 3D biomimetic scaffold for cartilage tissue engineering, 2021 Annual Meeting of Taiwanese Society of Biomedical Engineering (TSBME 2021), Taichung, Taiwan, Nov. 19-20, 2021.
  4. Chih-Yun Lee, Swathi Nedunchezian, Che-Wei Wu, Shung-Cheng Wu, Chung-Hwan Chen, Je-Ken Chang, Chih-Kuang Wang*, Development of bio-inspired osteochondral scaffolds using 3D bioprinting technology for cartilage tissue engineering, 2021中華民國生醫材料及藥物制放學會年會, 2021年12月4日, Tainan, Taiwan.

2022

  1. Pavanchandh Atturu, Chih-Kuang Wang*, The smooth muscle layer regeneration of vascular tissue accelerated by 3D bio-printed hybrid bioinks integrating inorganic crosslinker and ADSCs cells, 2022 Annual Meeting of the Society of Biomedical Materials and Drug Preparation and Release of the Republic of China and the Presentation of the Achievements of the Department of Engineering Medicine of the Division of Biological Sciences of the National Science Council (BCRS), September 2, 2022, National Tsing Hua University, Hsinchu City.

2023

  1. You-Cheng,Tsai1, Chih-Kuang Wang, Study on novel composite tissue-engineeringed tracheal grafts with bacteriostasis and photocurable 3D printing, 2023 ISOMRM & BCRS Aug. 31 – Sep. 3 2023, Taipei, Taiwan
  2. Chih-Yun Lee, Yu-Feng Su, Li-Ann Chi, Jie-Ying Wang, Li-Fun Lin, Chih-Kuang Wang, 3D Bioceramic burr hole scaffold fabricated by digital light processing for bone regeneration in rabbit calvarial defects, 2023 ISOMRM & BCRS Aug. 31 – Sep. 3 2023, Taipei, Taiwan

2024

  1. JUN-HAO YANG, Pei-Ying Li, You-Cheng Tsai, Chih-Kuang Wang*, Development of 3D printed photo-curable chitosan-based hydrogel system for antibacterial bio-membrane applications, 2024台灣化學工程學會71週年年會, 2024年11月9日至10日, 中原大學, 桃園, 台灣.
  2. 廖婕妤, 李之昀. 林莉芳,  董國龍,  王志光, 具可光固化及負溫感功能氧化鋁陶瓷漿料在數位光投影積層製造之研究, 一一三年中國材料科學學會年會, 113年11月15日～11月16日 國立中興大學, 台中, 台灣.

2025

  1. Pavanchandh Atturu, Chih-Kuang Wang*, Silanized acrylic graphene oxide nanocomposite reinforced mechanically tunable GelMA/HAMA printable bio-ink for adipose-derived stem cells differentiated mature smooth muscle cells, 2025 Chemistry National Meeting, March 8-9, 2025, Providence University, Taichung, Taiwan. （獲得優秀壁報論文獎）
  2. Atturu Pavanchandh, Chih-Kuang Wang, Study on Mechanically tunable, 3D bioprintable and photo-cross-linkable novel bioinks for adipose stem cells differentiate into phenotypic smooth muscle cells, 2025 Annual Conference of Taiwanese Society of Biomedical Engineering (TSBME 2025) – Annual Report of Ministry of Science and Technology, Taiwan, November 8-9, 2025, Tzu Chi University, Hualien, Taiwan.
  3. Jun-Hao Yang, Pei-Ying Lee, Yen-Han Lai, Suhana, Chih-Kuang Wang, Study on the physicochemical evaluation of photocurable quaternary ammonium salt chitosan-based hydrogel, 2025 Annual Conference of Taiwanese Society of Biomedical Engineering (TSBME 2025) – Annual Report of Ministry of Science and Technology, Taiwan, November 8-9, 2025 at Tzu Chi University, Hualien, Taiwan.
  4. 81. Pavanchandh Atturu, Sunaina Mudigonda, Suhana Minhas, Chih-Kuang Wang*, Phenotypic Effects of Adipose-Derived Stem Cell Seeding on Photocured Hybrid Hydrogels with Dual Molecular Weight Hyaluronic Acid Methacrylate, Gelatin Methacryloyl, and PEG Diacrylate, International Symposium of Materials on Regenerative Medicine (ISOMRM), Oct. 7-9, 2025, Messe Taoyuan, Taoyuan, Taiwan.

2026

  1. Pavanchandh Atturu, Chih-Kuang Wang* Study on Mechanically tunable, 3D bioprintable and photo-cross-linkable novel bioinks for adipose stem cells differentiate into phenotypic smooth muscle cells (oral presentation), ICABCCI 2026, June 25-26, 2026, National Chiayi University, Chiayi, Taiwan. (Received certificate of appreciation).
  2. Pavanchandh Atturu, Chih-Kuang Wang* Study on Mechanically tunable, 3D bioprintable and photo-cross-linkable novel bioinks for adipose stem cells differentiate into phenotypic smooth muscle cells, 2026 Chemistry Annual Meeting presented poster (CNM 2026), March 6-8, 2026, National Meeting at National Chung Hsing University (NTHU), Taichung, Taiwan.
  3. Yen-Han Lai, Suhana, Su-Shin Lee, Ke-Hsun Yang, Yi-Chia Wu, Pavanchandh Atturu, Chung-Yuan Chan, Chih-Kuang Wang, A GelMA/HAMA/PEGDA hybrid hydrogel platform for evaluating extracellular vesicle cargo, 2026 Chemistry Annual Meeting presented poster (CNM 2026), March 6-8, 2026, National Meeting at National Chung Hsing University (NTHU), Taichung, Taiwan.

國內期刊及雜誌論文

  1. 王志光*, 許富銀, 張仕欣, 簡育菁, 謝玉霞, 廖駿偉, “混合改質型二氧化鈦奈米光觸媒之特性評估”, J. Ceram. Soc.(陶業) 23: 40-47 2004
  2. 王志光*, “奈米光觸媒之疑慮與醒思”， 工業材料雜誌, 198:69-71, 2003
  3. 王志光*, “以二氧化鈦為主的可見光觸媒發展與基本原理”， 工業材料雜誌, 201:155-163, 2003
  4. 王志光, 朱建平, 陳瑾惠*, “雷射蒸鍍結晶性氫氧基磷灰石薄膜於鈦基材結構研究”, J. Ceram. Soc.(陶業), 1:50-57, 1997
  5. 王志光, 鄭鴻毅, 陳瑾惠, 朱建平*, “短碳纖碳化矽複合材料之製程及磨耗研究I-製程及性質研究”, J. Ceram. Soc.(陶業), 12:5-17, 1993
  6. 鄭鴻毅, 王志光, 陳瑾惠, 朱建平*, “短碳纖碳化矽複合材料之製程及磨耗研究II-磨耗研究”, J. Ceram. Soc.(陶業), 12, 18-31, 1993

國內外書刊

  1. Chih-Kuang Wang*, Wen-Cheng Chen, Chun-Cheng Hung, Yin-Chih Fu, Two new routes to form porous bioceramic beads, Bioceramics: Properties, Preparation and Applications, editor: Wolffe Kossler and Jacob Fuchs, Nova Science Publishers, Inc. Hauppauge, NY 11788, 2009. ISBN: 978-1-60741-056-0
  2. Mei-Ling Ho*, Je-Ken Chang, Chung-Hwan Chen, Yin-Chih Fu, Chih-Kuang Wang, Chau-Zen Wang, Rajalakshmanan Eswaramoorthy, Shun-Cheng Wu, Application of adipose derived stem cells for bone and cartilage regeneration, Edited book: Mesenchymal stem cells, editor: Yin Xiao, Nova Science Publishers, Inc., 01 September 2011. ISBN: 978-61324-669-6